How to transmit left/right alarms in the wireless WX and BXS series

The battery-powered WX (WXI and WXS) and BXS series both feature individual left and right detection areas. When connected correctly they can trigger and alert precisely where the activation occurred.

The WX (WXI and WXS) and BXS have two independent alarm outputs that can be either triggered as left and right individual alarms or as a single unit alarm. The latter will transmit an alarm but not indicate in which detection area it occurred. The need to use the left and right output would depend on the security setup, as these settings would not be required for every. However, if the sensor is used with two cameras or with a camera with pre-sets, it would be beneficial to use the left and right feature to narrow down the intrusion and visually verify it.

For any help with the wiring of the wireless transmitter please refer to the manual which is included with the product and is available from the product pages on our website, or contact our technical team.