REDWALL SIP-4010/5 Outdoor long range PIR with creep zone

Product Details

The REDWALL SIP is a series of long range volumetric outdoor PIRs designed to work in conjunction with CCTV systems and trigger camera position to the zone of intrusion. Very stable in outdoor environment the Redwall SIP sensors have a very low false alarm rate and are instrumental for make event-triggered security systems stable. The SIP-4010/5 is a hardwired model providing a detection range of 40m by 10m (LxW) with an additional creep zone detection area of 6x9m wide ideal to cover long and relatively wide sites areas.

Designed to trigger CCTV systems	Weather and vandal-resistant
The REDWALL SIP series is designed to be connected to PTZ or fixed dome cameras and trigger the CCTV system when an intrusion occurs. The SIP-4010/5 has three independent detection zones -far, near and creep zones, with independent sensitivity selection, that can trigger the right camera pre-sets and provide the best view of the scene to local security staff or remote monitoring stations.	The SIP PIRs are designed to be used in harsh outdoor environment, their sensitivity are adjusted automatically to the ambient temperature and illuminance and they have a IP65 rating for the main unit. They also vandal-resistant featuring a polycarbonate housing, an accelerometer to detect if the sensor position has been tampered with and an active infrared antimasking.

Applications

Buildings
Approach

Key Features

40x10m intelligent PIR for approach detection
Designed to trigger CCTV systems
Three independent detection zones far/near/creep
Active infrared antimasking and vandal-resistant

SIP-AT

Redwall SIP series area adjustment tool kit

Heating Unit SIP-HU

Heating unit for all REDWALL SIP series

Optex Redwall Sip 3020 5 4010 5 404 5 Specifications En

REDWALL - How to use the SIP View Finder?

Once the Redwall SIP unit is mounted on the wall or a pole, ideally at a height of 4m – or at least above 2.3m, the View Finder should be plugged onto the sensor using the two holes to secure it. The correct viewing plate should be inserted – each SIP model has a corresponding viewing plate. Looking through the plate, the sensor should be adjusted to ensure that it is grounded at the maximum detection distance. For instance, for a SIP-3020, the sensor should be grounded (not directed towards the sky) at 30m. Additionally, it is best to avoid having the detection area right at the edge of the security area, rather it is best practice to leave 1m either side. If the detection area is 20m wide, it is better to centre the view at 11m from the edge on either side. If required, masking sticks can be used to mask part of the detection area. Watch our video tutorial