Redwall Sip 100 Picture 165X

Product Details

The REDWALL SIP is a series of long range outdoor PIR detector designed to work in conjunction with CCTV systems to provide a reliable commercial security solution. Very stable in outdoor environment the REDWALL SIP motion sensors combine a high catch rate with a minimum false alarm rate, ideal for event-triggered intrusion detection systems. The SIP-100 is a hardwired model providing a detection range of 100x3m (LxW) ideal to protect long and narrow areas such as along fence lines or buildings and alleyways. The SIP-100 features 3 total outputs: two separate outputs for far and near areas and another for creep-zone detection.

Designed to trigger CCTV systemsWeather and vandal-resistant
The REDWALL SIP series is designed to be connected to PTZ or fixed cameras and trigger the CCTV system when an intrusion occurs. The SIP-100 has two independent detection zones, far and near zones, with independent sensitivity selection, that can trigger camera pre-set and provide the best view of the scene to local security staff or remote monitoring stations.
REDWALL SIP PIRs are designed to be used in harsh outdoor environment, their sensitivity are adjusted automatically to the ambient temperature and illuminance, they feature an IP65 rating for the main unit. The SIP series is vandal-resistantant all SIP products are built with polycarbonate housing, featuring an accelerometer to detect whether or not the sensor position has been tampered with.

Applications

  • Buildings
  • Perimeter
  • Approach

Key Features

  • Double Quad pyro-elements with patented Double Conductive Shielding
  • Advanced detection algorithm
  • Reinforced polycarbonate housing
  • Equipped with anti rotation & anti-masking functions to prevent vandalism

FAQs

Once the Redwall SIP unit is mounted on the wall or a pole, ideally at a height of 4m – or at least above 2.3m, the View Finder should be plugged onto the sensor using the two holes to secure it. The correct viewing plate should be inserted – each SIP model has a corresponding viewing plate. Looking through the plate, the sensor should be adjusted to ensure that it is grounded at the maximum detection distance. For instance, for a SIP-3020, the sensor should be grounded (not directed towards the sky) at 30m. Additionally, it is best to avoid having the detection area right at the edge of the security area, rather it is best practice to leave 1m either side. If the detection area is 20m wide, it is better to centre the view at 11m from the edge on either side. If required, masking sticks can be used to mask part of the detection area. Watch our video tutorial

The detection will be less accurate. Ensure that the SIP is not installed higher than the recommended height which is 4m.

FAQs

Other products you may be interested in